Five Simple Checks You Should Make Before Calling for AC Repair

Ac repair clearwater

Having to make a call to a local AC repair man can be pricey. Depending on the extent of the damage to your air conditioning, the job could set you back a couple hundred to a couple thousand dollars. Even if the necessary air conditioning service is not expensive, living without air-conditioning while you wait for your local AC repair contractor to arrive is no walk in the park; the more unbearable the temperature is, the more likely there are a hundred other homes waiting for air conditioning repair and the longer you’re going to have to wait in the blistering heat.

While some AC repair issues require an expert, many of the most common issues can be corrected fairly easily yourself. Before calling a local AC repair contractor, take the following five steps and see if your AC starts cranking:

  1. Check the Breaker
    If your AC unit is getting no power at all, it could be as simple as the circuit breaker. Air conditioners draw a lot of electricity. If you have appliances on the same breaker it can cause the circuit to overload. As a safety mechanism, the circuit breaker opens and shuts off the electrical flow, to protect the overload from burning your house down. Simply go to the circuit box and make sure all of the breakers are switched to the “On” position. This is a simple repair that anyone can complete; bringing an AC repair man out for this simple issue will still cost you hundreds of dollars.
  2. Check the Thermostat
    Another extremely simple AC troubleshooting step that you can take yourself is making sure the thermostat is functioning properly. Some thermostats are not hardwired into the wall, if your unit is powered by batteries, you might just need to replace those AA’s to get your AC up and running again.
  3. Check Your Filter
    Replacing your air filter as recommended by your AC manufacturer is a good way to avoid any repairs to begin with. If you haven’t changed your filter in a while, it could be clogged which is preventing cool air from flowing properly in your home. If your air filter gets really neglected, it can be the culprit behind expensive repairs that you want to avoid altogether.
  4. Check for Ice on the Unit
    If ice builds up on your air conditioning, the unit will not be able to run properly. Removing ice from your air conditioning is is another simple step that anyone can do. Just turn the air conditioning off, and let it melt on its own. If you have the know-how, you can turn the unit off and let the fan run, which will help the ice run faster.
  5. Check your Ducts
    Although this requires a somewhat intermediate level of skill, another common air conditioning issue is the ducts being dirty or blocked. If you feel comfortable doing so, you can climb into your attic (or under your house if that’s where your duct work is) and do a visual check to make sure there is no damage that is preventing proper airflow. Sometimes you may need to clean them out to prevent a blockage.

Do you have any other simple AC checks that anyone can complete? We want to hear them in the comment section below.

Leave a Reply

You must be logged in to post a comment.

Antique Videos

Article Calendar

December 2017
M T W T F S S
« Nov    
 123
45678910
11121314151617
18192021222324
25262728293031